Operations processing
Calculation of modes, choice of strategy, quality control
12 instruments✨Surface and chips
01🪞
Surface cleanliness
Calculation of theoretical roughness Ra/Rz by feed, nose radius and type of processing. Selection of modes for a given cleanliness class.
Calculate Ra/Rz→
02🌀
Chip thinning
Calculation of the true chip thickness taking into account the cutter entry angle. Allows you to increase the feed without overloading the edge when milling with small radial depths.
Calculate Hm→
⚙️Milling
03🔄
Milling - basic modes
Calculation of cutting speed, spindle speed, feed per tooth and minute feed. Input: cutter diameter, number of teeth, material, recommended Vc and fz.
Calculate modes→
04📐
Overlap and roughness
Calculation of roughness during face milling depending on the percentage of overlap, feed and radius. Optimization of the pass pitch for a given Ra.
Calculate step→
🕳️Drilling
06⬇️
Drilling - modes
Calculation of n (rpm) and Vf (mm/min) by drill diameter, material and tool type (HSS / VHM). Consideration of cooling and hole depth.
Calculate modes→
07🎯
Pilot drilling
Determines the need and parameters of a pilot hole before the main drilling. Impact on axis accuracy and tool life.
Calculate→
08🔧
Drilling for thread
Calculation of the diameter of the hole for the tap, taking into account the material, accuracy class and percentage of thread filling. Metric, inch, pipe thread.
Select Ø→
09🔍
Drilling diagnostics
Problems and solutions when drilling: breakage, deviation from the axis, diameter breakdown, burrs. Determines the cause and suggests adjustments to modes or tools.
Diagnose→
10📏
Deep drilling
Параметры сверления отверстий с L/D > 5. Стратегия клевания, периодичность вывода стружки, коррекция подачи и охлаждение по глубине.
Calculate→
11📋
Thread diameter
Reference table of drilling diameters for metric, inch and pipe threads. Quickly search by thread designation or diameter.
Open table→
Question about a specific operation? Write to technologist →